分子筛协同有机磷酸盐改性聚丙烯性能的研究

采用直接混合法制得等规聚丙烯(iPP)/分子筛体系和iPP/有机磷酸盐成核剂(NA11)/分子筛体系,研究不同种类分子筛在不同含量下对iPP结晶温度及力学性能的影响,进而研究不同分子筛在低含量下协同有机磷酸盐对iPP体系成核性能的影响,从动力学角度解释了提升原因。结果表明,单独添加分子筛制得的iPP体系,随着分子筛含量的增加,结晶性能和力学性能得到显著提升,不同分子筛对iPP性能的影响不同,ZSM-5型分子筛在含量为5%(质量分数,下同)以上具有促进iPPβ晶型生成的效果;采用直接混合法制得的不同分子筛复配有机磷酸酯钠盐NA11成核剂可提升iPP的力学性能;特别是当0.1%NA11和0.1%4A型分子筛一起添加到iPP中时,可在保证iPP具有较好刚性的同时兼具有良好的韧性,使iPP的弯曲模量提高35.2%、冲击强度提高14.4%,从而达到促进iPP材料刚韧平衡的效果。     

DTNF膜对煤化工HERO高盐废水的分盐实验研究

以新疆某煤化工高效反渗透（HERO）高盐废水为研究对象,测试了碟管式纳滤（DTNF）膜在70%、80%、90%回收率下的分盐效果,并择优采用高级氧化进行了纯化处理。中试结果表明,DTNF膜对HERO高盐废水有很好的分盐效果;提质后的氯化钠结晶盐纯度≥98.5%,满足GB/T 5462—2015《工业盐》精制工业干盐一级标准;硫酸钠结晶盐纯度≥98%,满足GB/T 6009—2014《工业无水硫酸钠》Ⅱ类一等品标准。     

Fabrication and Thermal Dissipation Properties of Carbon Nanofibers Derived from Electrospun Poly(Amic Acid) Carboxylate Salt Nanofibers

Polyimides (PIs) possess excellent mechanical properties, thermal stability, and chemical resistance and can be converted to carbon materials by thermal carbonization. The preparation of carbon nanomaterials by carbonizing PI‐based nanomaterials, however, has been less studied. In this work, the fabrication of PI nanofibers is investigated using electrospinning and their transformation to carbon nanofibers. Poly(amic acid) carboxylate salts (PAASs) solutions are first electrospun to form PAAS nanofibers. After the imidization and carbonization processes, PI and carbon nanofibers can then be obtained, respectively. The Raman spectra reveal that the carbon nanofibers are partially graphitized by the carbonization process. The diameters of the PI nanofibers are observed to be smaller than those of the PAAS nanofibers because of the formation of the more densely packed structures after the imidization processes; the diameters of the carbon nanofibers remain similar to those of the PI nanofibers after the carbonization process. The thermal dissipation behaviors of the PI and carbon nanofibers are also examined. The infrared images indicate that the transfer rates of thermal energy for the carbon nanofibers are higher than those for the PI nanofibers, due to the better thermal conductivity of carbon caused by the covalent sp² bonding between carbon atoms.     

300M超高强钢在中性盐雾环境中的腐蚀行为及机制

摘要：为了研究300M超高强钢在中性盐雾环境中的腐蚀行为及腐蚀机制，采用失重法，宏观、微观腐蚀形貌分析，三维表面轮廓分析及电化学分析的研究方法，来表征腐蚀实验现象并进行分析。结果表明：300M超高强钢在中性盐雾环境中的腐蚀产物为FeOOH、Fe2O3、Fe(OH)3和Fe3O4；腐蚀速率随着腐蚀时间逐渐降低，腐蚀后期（72h）腐蚀速率降低50%；腐蚀初期以点蚀为主，点蚀坑通过横向扩展，逐渐发展为后期的均匀腐蚀，腐蚀表面形貌呈沟壑状；外腐蚀层对基体的保护能力很弱，Cr元素在锈层靠近基体的一侧偏聚使内腐蚀层具有一定的抗腐蚀性。     

Incorporation of calcium salts into xanthan gum matrices: hydration,erosion and drug release characteristics

Xanthan gum (XG), a hydrophilic biopolymer with modified release properties, was used to produce directly compressed matrix tablets containing a model drug, sodium p-aminosalicylate. Three formulations were prepared, each containing a different calcium dihydrate salt: calcium chloride, calcium sulfate or dibasic calcium phosphate. The aim of the investigation was to relate the calcium ion content and solubility of the calcium salt to the in vitro drug release profile of the xanthan matrices. Tablet hydration, erosion and drug release were determined in distilled water using the British Pharmacopoeia (BP) paddle method. The data showed that the overall drug release was the greatest with addition of calcium sulfate, followed by calcium chloride and dibasic calcium phosphate. The chloride salt formulation displayed the greatest percentage erosion due to rapid mass loss during the initial phase, followed by those with sulfate or phosphate salts. As xanthan gel viscosity increased and drug release was also found to be lower, it can be concluded that drug release is influenced by the solubility of the salt present in the formulation, since these parameters determine the viscosity and structure of the gel layer.     

钡盐法处理六价铬电镀废水及最优工艺参数研究

使用钡盐法对铬废水处理,对p H值在废水中的初值、反映温度计量结果、重铬酸钾的浓度等,在回收六价铬的影响效果进行了分析。对废水中的六价铬使用了源自吸收的分光光度法回收。经过处理后,废水中的p H为8~9的时候,六价铬的回收在9%。废水中的六价铬随着其浓度不断上升增加。超过10℃的时候,六价铬的反应没有非常大的影响,但是当温度降低到10℃以下的时候,回收率就逐步下降了。经过处理之后,六价铬的浓度达到了0.276 7 mg/L,达到了相关规定的标准。     

Sinusoidal disturbance rejection in chaotic planar oscillators

The main goal of this paper is to design a compensator able to restore the nominal behavior of a planar system, which is rendered chaotic by an unmeasurable sinusoidal disturbance input. To reach such a goal, some instruments, taken from algebraic geometry, are used to estimate the unmeasurable disturbance from the time derivatives of the output of the system and of the control input. Copyright © 2015 John Wiley & Sons, Ltd.     

Active disturbance rejection control to MIMO nonlinear systems with stochastic uncertainties: approximate decoupling and output-feedback stabilisation

ABSTRACT

In this paper, we apply the active disturbance rejection control, an emerging control technology, to output-feedback stabilisation for a class of uncertain multi-input multi-output nonlinear systems with vast stochastic uncertainties. Two types of extended state observers (ESO) are designed to estimate both unmeasured states and stochastic total disturbance which includes unknown system dynamics, unknown stochastic inverse dynamics, external stochastic disturbance without requiring the statistical characteristics, uncertain nonlinear interactions between subsystems, and uncertainties caused by the deviation of control parameters from their nominal values. The estimations decouple approximately the system after cancelling stochastic total disturbance in the feedback loop. As a result, we are able to design an ESO-based stabilising output-feedback and prove the practical mean square stability for the closed-loop system with constant gain ESO and the asymptotic mean square stability with time-varying gain ESO, respectively. Some numerical simulations are presented to demonstrate the effectiveness of the proposed output-feedback control scheme.     

歧口凹陷西南缘沙河街组一段下亚段古环境特征与沉积模式

沙河街组一段下亚段是歧口凹陷重要的页岩油发育层系，为进一步了解该段细粒沉积岩沉积环境、旋回特征和沉积模式，利用地震、测井、录井和系统取心分析资料对目的层位展开综合研究。研究区细粒沉积岩包括长英质页岩、碳酸盐质页岩（白云岩、灰质页岩、白云质页岩）、黏土质页岩和混合质页岩4种类型，混合质页岩、长英质页岩和碳酸盐质页岩占优势；总体为还原-强还原沉积环境，水体盐度较高，主要受陆源碎屑沉积和生物化学沉积作用控制；宽缓湖湾与歧口主凹之间形成高盐度带，受准同生期蒸发浓缩作用，滨-浅湖带高密度富Mg²⁺超咸水在重力作用下，沿着湖底向湖盆内部流动，早期形成的方解石发生白云石化，形成准同生白云岩；岩性组合受旋回控制作用明显，短期反-正旋回转换面之下位置发育一层稳定白云岩或白云质页岩，碳酸盐岩（甜点段）发育于长期旋回内的下降期半旋回，上升期长期旋回主要发育黏土质混合页岩和黏土质页岩（隔板层），进一步可以总结出强陆源碎屑供给区细粒沉积模式和弱陆源碎屑供给区细粒沉积模式。     

载铜树脂处理高含盐氨氮废水的性能

针对高含盐氨氮废水，选择具有不同功能基团的树脂为载体，进行负载Cu2+改性制得载铜树脂并对其处理高含盐氨氮废水的性能进行研究。在筛选出最佳载铜树脂的基础上，研究pH及Na+浓度、树脂投加量、反应时间对载铜树脂处理高含盐氨氮废水效果的影响，通过对吸附氨氮前后的载铜树脂进行SEM和EDS表征分析并构建吸附动力学模型以进一步探究配位吸附的过程。结果表明，Cu2+可与螯合树脂D751稳定结合且在宽pH值下均表现出耐盐性和良好的氨氮吸附效果；在室温(25℃)、pH=11及Na+浓度4 g/L、树脂投加量8 g/L、反应时间60 min的条件下，D751载铜树脂对氨氮的去除率为34.8%。D751载铜树脂吸附氨氮后其表面出现明显的晶状结构物质，该物质可能为铜氨络合物。D751载铜树脂对高含盐氨氮的吸附符合准二级动力学模型。